background image

8

             

ASSEMBLY / OPERATING INSTRUCTIONS

1

1

2

The leg rest has 3 adjustable positions.
To adjust,push in leg rest adjustment buttons on 
both sides of the leg rest.
Raise or lower to desired position.
Release adjustment buttons to secure.

A five point harness is provided to restrain your child. 
To unfasten the harness pinch (a) and (b) waist strap 
prongs and pull the clips clear.
Sliding adjusters are fitted on the shoulder straps and 
waist straps (c).

To fasten the harness 

push the waist strap clips into 

the buckle until they lock in place.

Sliding adjusters 

are fitted on the shoulder and waist 

straps (c). The harness should be carefully adjusted so 

that it fits your child comfortably.

1a.
1b.
1c.
1d.

1a.
1b.

1c.

2a.

2b.

To adjust the Legrest...

To use the Harness...

To assemble Footrest...

1

Align Footrest with the footrest slot on the leg rest.
Push and hold both adjustment buttons on the 

sides of the footrest whilst pushing the footrest into 

the desired slot.

1a.
1b.

2

The tray can be stored on the back legs of the high 

chair. 
Align the holes on the rear of the tray with the small 

pegs on the back legs. 
Push down until secure.

2a.

2b.

2c.

To fit Serving Tray...

Summary of Contents for PIp 044333













Reviews: