www.childcareproducts.com.au
www.childcareproducts.com.au
10
3
Parts
Base
Use of the electronic controls
1. To start the swing, press either the speed or music
buttons for at least 1 second. The swing is
automatically set to medium speed when turned on.
GIVE THE SWING SEAT A PUSH TO GET IT
STARTED.
2. Adjust the swing’s speed by depressing the up or
down button. The number of lighted bars indicates
the speed chosen with fewer bars denoting slower
speed. The swing may be left in the on position
without swinging when only one bar is lit. This will
allow the music to play while the swing is stationary.
3. Press either music button to select music to be
played. The music will automatically play at its
loudest level. To adjust the music volume, press the
music button a second time. This will set the music to
medium volume. Press the music button a third time
for the lowest volume or a fourth time to switch the
music off.
4. The timer function of the swing allows you to
automatically shut off the swing in 10 minutes, 20
minutes, 30 minutes, or 40 minutes. Once you have
started the swing in motion, press the timer button.
The swing will now automatically shut off in 10
minutes. Press the timer button a second time to set
for 20 minutes, a third time for 30 minutes, or a
fourth time for 40 minutes. Pressing the timer a fifth
time will turn the timer function to off. The bottom
lighted bar will flash every 5 seconds to indicate the
amount of time that you have selected for the timer,
as well as indicate how much time is remaining
before the swing is turned off.
5. The off button turns off all functions of the swing.
A
B
B
B
Swing Joint
Seat
Legs
Seat hanger
Base cross tube
Toy bar
Motor Joint
Upper cross bar
Lower cross bar
Tray
Mobile toy set
