16
#12
#41
#40
#42
#40
#40
#42
#10
1. Turn Rock Wall Assembly face down and install item #10
2. Placing item #10, 2" up from bottom of items #01 AND #03 as shown in DETAIL VIEW.
3. Item #10 should extend out past the outside face of items #01and #03 approximately 10".
Attach item #10 to items #01 and #03 with hardware items #40 and #41.
4. Position items #12 and #13 as shown bottom edge of items #12 and #13 must be flush
with bottom face of item #10.
5. Attach items #12 and #13 with hardware items #40, #41, and #42.
ROCK WALL BASE
ASSEMBLY
HARDWARE NEEDED
#34
#8X1.25 ROUND HEAD SCREW
(14)
#40
5/16” FLAT WASHER
(6)
#41
5/16 X 4” LAG SCREW
(2)
#42
5/16 X 5” LAG SCREW
(4)
#55
#10 FLAT WASHER
(14)
#63
#3/8-16 X 2” SOCKET HEAD SCREW (14)
PARTS NEEDED
#10
BASE
(1)
#12
ANGLE BRACE (RIGHT)
(1)
#13
ANGLE BRACE (LEFT)
(1)
#61
CLIMBING ROCK
(14)
2"
10"
#01
#13
#10
FLUSH
VIEW FROM BACKSIDE OF
ROCK WALL ASSEMBLY
#61
6. Attach items #61 using hardware #34, #55 and #63.
#63
#34
#55