Reproduction or copy only with permission by ChiliTec GmbH , Lehre - Germany
Instruction Manual
WEEE Reg.-Nr. 25841852
1. Installation ( see also Safety Page1 )
The pump can (... if the battery should be even empty) to be operated directly via the car ci-
garette lighter. Not use with conneted power supply!
1. Screw out the adapter cable to the pump. Then the matching
Screw Adapter for your desired application maybe bicycle valve.
2.Fix now on the adapter on the bicycle valve.
3. Press the "Unit" - The display shows the currently on bicycle tires
existing pressure. By pressing the "Unit" key to change the units
(BAR, PSI, KPA or kg / cm²). Showing unity here that the respective real values. So, choose the
unit as "BAR" from. Now real value is still shown.
4. Now starting from the real value set with the ± buttons to select your new value.
For example, for your bicycle tires 2.5 BAR. Each single push to the ± key fits
the value in small steps, holding the button will make fast and big steps.
The display, and the new set value, will flash for about 4 seconds.
5. After it stopped blinking, you press the ON / OFF button, the
Pumping process starts now, the LEDs turn on. The pump stops automatically when it reaches
the preset value of 2.5 BAR.
6. Turn the pump on / off again.
7. Store your pump in a dry place at room temperature.
1. General information ( Safety )
Do not use the device in an explosive or dagerous Area.
(For example, in gas stations, underground or unventilated rooms ) .
Please stop the pumping process latest after 8 minutes. Every 8 minutes
your pump need a break for also minimum 8 minutes! This protects the material and
safes the life of your pump and the internal battery.
Please stop the pumping process for 30 minutes if the device has become hot or
if you hear strange ( not corresponding to the normal noise ) noise .
Hold the device away from children , heat, cold , rain , water .
If the device falls down maybe the device can be destroyed .
Do charge the device at least every 0.5 years, even when you dont use it..
When using the cigarette lighter of your car , the engine of the car has to run. Thanks
-Product Sheet-
06-2016- V1.00
Safety instructions and important information !
To ensure the safety at all times , and the full range of product usage,
please read the safety instructions carefully and calmly through !
