10
more (use a wrench) to prevent further rotation.
Note:
Use the bubble level next to the rain sensor to make sure sensor
array is completely level. If the sensor is not level, the rain gauge, UV
and solar radiation sensors will not measure properly.
5.2.7 Reset Button and Transmitter LED
In the event that the sensor array is not transmitting, reset the sensor
array.
With an open ended paperclip, press and hold the
RESET BUTTON
for
three seconds to completely discharge the voltage.
Take out the batteries and wait one minute, while covering the solar
panel to drain the voltage.
Put batteries back in and resynchronize with console by powering
down and up the console with the sensor array about 3 meter away.
Figure 11
5.3 Best Practices for Wireless Communication
Note:
To insure proper communication, mount the remote sensor(s)
upright on a vertical surface, such as a wall.
Do not lay the sensor
flat.
Wireless communication is susceptible to interference, distance, walls
and metal barriers. We recommend the following best practices for
trouble free wireless communication.
Electro-Magnetic Interference (EMI)
. Keep the console several feet
Summary of Contents for 22515
Page 37: ...37 List display Weather Map ...
