18
Note:
Press the
WIND/+
or
PRESSURE/-
key to set the value.
Note:
If user to change minute value, second will auto clear to 0.
Note:
WIFI firmware version 1.4.4 and above support Global Time
synchronization. Time zone, DST and date will automatic updated from
internet when base station is connected to WIFI internet.
6.4.4 Pressure
-Press the
SET
key tenth to select the ABS/REL pressure unit,
pressure value and hPa digits will start flashing, press the
WIND
/+ or
PRESSURE
/- key to select the unit (hPa, inhg, mmhg)
-Press the
SET
key eleventh to adjust the REL pressure value, REL
pressure value and hPa digits will start flashing, press the
WIND
/+
key or
PRESSURE
/- key to increase or decrease the REL pressure
value.
1)
Viewing Absolute vs. Relative Pressure
To switch between absolute and relative pressure, press and hold the
[PRESSURE -] button for two seconds.
Absolute pressure is the measured atmospheric pressure, and is a
function of altitude, and to a lesser extent, changes in weather
conditions.
Absolute pressure is not corrected to sea-level conditions.
Relative pressure is corrected to sea-level conditions.
2)
Rate of Change of Pressure Graph
The rate of change of pressure graphic is shown to the left of the
barometric pressure and signifies the difference between the daily
average pressure and the 30 day average (in hPa).
Summary of Contents for 22515
Page 37: ...37 List display Weather Map ...
