9
5.2.6 Mount assembled outdoor sensor package
5.2.6.1 Before you mount
Before proceeding with the outdoor mounting detailed in this section,
you may want to skip to setup instructions in section
Fehler!
Verweisquelle konnte nicht gefunden werden.
first, while you keep the assembled outdoor sensor package nearby
(although preferably not closer than 5 ft. from the console). This will
make any troubleshooting and adjustments easier and avoids any
distance or interference related issues from the setup.
After setup is complete and everything is working, return here for
outdoor mounting. If issues show up after outdoor mounting they are
almost certainly related to distance, obstacles etc.
5.2.6.2 Mounting
You can attach a pipe to a permanent structure and then attach the
sensor package to it (see Figure 9). The U-Bolts will accommodate a
pipe diameter of 1-2 inches (pipe not included).
Finally, place the sensor package on top of the prepared
e.The U-Bolts should be loose enough to allow this but loosen
s as necessary. Once placed, hand tightens all four nuts,
to do so evenly.
Now you will need to align the whole package in the proper
y rotating it on top of the mounting pipe as needed.Locate
labeled “North” that you will find on top of the sensor package
xtto the light sensor. You must rotate the whole sensor package
his arrow points due north. To achieve proper alignment,
usea compass (many cell phones have a compass application).
Once rotated in the correct orientation, lightly tighten the
Figure 10
Figure 9
Before proceeding with the outdoor mounting detailed in this section,
Fehler!
and onwards
first, while you keep the assembled outdoor sensor package nearby
(although preferably not closer than 5 ft. from the console). This will
make any troubleshooting and adjustments easier and avoids any
After setup is complete and everything is working, return here for
outdoor mounting. If issues show up after outdoor mounting they are
attach a pipe to a permanent structure and then attach the
Bolts will accommodate a
mounting pip
loosen the nut
nuts, taking care
proper direction b
needed.Locate the arrow
package right ne
package until t
it is helpful to
application).
bolts a little
Summary of Contents for 22515
Page 37: ...37 List display Weather Map ...
