Status: 11/2021 - Version 1.08
Page 2
Item no. 21198
Product description:
The product is an electrical smoke detector that is operated with 9V and an additional 3x1.5V (AA Mignon). You can
use this smoke detector with a 9V battery (type is 6LR61 or 6F22) for about 1 year, depending on the type. The high
sensitivity of the smoke detector also detects dense smoke from smoldering fires and black smoke. This means fire
can be extinguished before it spreads. This smoke detector can be installed in any room except for bathrooms. During
installation, it must be ensured that people can hear the alarm and thus react as quickly as possible. Install at least
one smoke alarm in the hallway near the living area and bedroom. By installing it near the living and sleeping areas,
you can ensure
Recommended installation concept for typical one-storey residential buildings:
Mount the smoke detector on ceilings or inside walls. Every corridor should be equipped with a smoke detector. If the
corridor is longer than 10 meters, we recommend installing one smoke detector at each end of the corridor. If you live
in the basement, a smoke detector should be mounted on the basement ceiling.
Recommended installation concept for typical multi-storey residential buildings:
Proceed exactly as in the assembly concept for one-story residential buildings. However, you should also install a
smoke detector on each floor of the stairwell, but at least on the first and second floors.
Important safety information:
1. The test button is specially designed to test the alarm function of the smoke detector. Never test the smoke
detector with other test equipment! To ensure the smoke alarm is working properly, test the smoke alarm every
week.
2. For your safety: Never remove the battery to stop the alarm. You can open the window or turn on a fan to let the
smoke out and then stop the alarm.
3. Consult an electrician to install the smoke alarm. When installing, the electrician must follow local and national
requirements and building regulations.
4. This smoke detector is particularly suitable for a single-family household. In residential buildings with several
families, individual smoke detectors are required for each family. Never install smoke detectors in empty residential
buildings. Furthermore, smoke detectors must not be used as alarm backup systems.
5. A smoke detector should be installed in every room.
6. The smoke detector cannot trigger an alarm in the following situations:
a) the fire is too far from the living area,
b) the fire is on another floor,
c) the fire is in a gas duct,
d) the fire is in a wall,
e) the fire is on the roof,
f) in an airtight place.
ATTENTION: In the situations mentioned above, the smoke detector cannot trigger an alarm. The smoke detector
cannot detect and warn of fires outside of the detection area or outside of the room.
7. The smoke alarm sounds to warn the residents of a fire. However, there are situations in which individual residents
cannot hear the alarm. Examples: The resident(s).
a) are not in the room where a smoke detector is installed,
b) sleep deeply or snore very loudly,
c) are under the influence of medication, drugs or alcohol,
d) have impaired hearing or wear hearing protection,
If you find that the smoke alarm is not sounding, first check the smoke alarm. In any case, it must be ensured that
everyone in the house can hear the alarm and
can react quickly to avoid personal injury. If individual residents have poor hearing, install a smoke detector with a
display or vibration system.
Reproduction only with the permission of
ChiliTec GmbH, Bäckerberg 12, 38165 Lehre
EAR (WEEE): DE25841852
LUCID PackagingG: DE5562476395648
GRS (UBA Register) No.: 21003466
