Status: 12/2021 - Version 1.00
Page 2
Separate safety instructions for 230V installations
The ground spike may only be inserted up to the mark (plate). Make sure it is in a safe location. Do not place on
walkways or in blind spots (risk of tripping). The products are weatherproof, but not waterproof. When choosing
the location, make sure that it does not fill up in heavy rain, for example a depression or a hollow. The splash
protection of the product is only retained if the connected products have the same or a higher protection class
(minimum IP44). If you are not going to use it for a long time, you should switch off the power supply or pull the
plug. The ground spike is very pointed. Avoid injuries through careful handling.
Installation instructions:
• Always switch off the main power and only switch it on again after the installation has been completed
• only use the cable approved for the purpose
• Ground spike NOT included, can be ordered as an option!
Connection or installation may only be carried out by qualified personnel / qualified electricians in a voltage or
current-free state! For all work, completely switch off the circuit in which the installation is being carried out at the
main fuse!
Reproduction only with permission from
ChiliTec GmbH, Bäckerberg 12, 38165 Lehr
EAR (WEEE): DE25841852
LUCID Packaging Act: DE5562476395648
GRS (UBA register) no .: 21003466
