Chiltern Invadex LiteTrack Portable Gantry
2
•
Only a single hoist should be attached to the gantry at
any one time
•
Do not operate the WispaLite Portable Hoist and gantry
without training in the safe operation of the hoist,
gantry and slings. The gantry should only be assembled
by a competent person.
•
Only use slings which have been assessed as
suitable by a competent person.
•
Read the Wispa Lite Portable hoist User Guide in
conjunction with this guide.
•
Read the relevant Sling User Guide, which is
provided with each sling. It explains in detail how to
use slings correctly.
•
Do not use the Gantry if there is any doubt about the
integrity of the gantry, wear to the hoist carry bar or
there is fraying or stitch damage to the lifting tape or
slings, or if the gantry or hoist itself is damaged in any way.
•
Do not exceed the Maximum load of the gantry or hoist.
Wispa LiteTrack Gantry
210kgs (33 Stone) (460 lb)
WispaLite Portable Hoist
200kgs (31 Stone) (440 lb)
•
Ensure when the gantry and hoist are in use that
the surrounding area is clear and the person being
lifted is clear of all objects.
•
Always ensure the gantry is assembled and
adjusted for level using the spirit levels on the end beams.
•
There are only 3 width adjustment holes per end
beam. The pin must always be located in one of these.
Safety
Safety Considerations
Intended Use of the Product
The Wispa LiteTrack gantry sytem has been designed to lift and transfer
a less able person with the help of a carer. The gantry is portable and
can easily be relocated and reassembled wherever required. It should be
used with the WispaLite Portable Hoist and a Wispa sling or other lifting
accessories from the Chiltern Invadex range, as assessed by a trained person.
Note: Not all slings and accessories are compatible with the Wispa Lite hoist.
If you are unsure please contact your nearest Chiltern Invadex Office.
The correct and appropriate use of this product will reduce the risks
associated with manual patient handling. The lifting/transferring task should
be assessed and planned by a trained person.
User Guide
19
Gantry Service Record
Serviced By
(company)
.......................................................................................
Telephone no
....................................................................................
Engineers training cert. no.
Signature
................................................................ .................................
Date: .............................. Load Tested To: .............................Kgs
Comments
..........................................................................................
...........................................................................................................
Serviced By
(company)
.......................................................................................
Telephone no
.......................................................................................
Engineers training cert. no.
Signature
...................................................................... .................................
Date: .............................. Load Tested To: ..........................Kgs
Comments
.........................................................................................
...........................................................................................................
Serviced By
(company)
.......................................................................................
Telephone no
.......................................................................................
Engineers training cert. no.
Signature
...................................................................... .................................
Date: .............................. Load Tested To: ..........................Kgs
Comments
.........................................................................................
...........................................................................................................
