User Guide
9
5.
Fig 4.4 Locate the
side panel (5) into the
channel in the corner
post.
6.
Fig 4.5 Position the
corner post (6) repeat
as instruction 4.
Fig 4.4
Fig 4.5
Chiltern Invadex Side Entry MK2
12
Door assembly -
Swinging doors
(standard)
10. Fig 4.9 Slide the
doors into the corner
posts (6,7), ensuring
that the doors open
outwards. Secure
with the screws and
slot covers provided
(see Inset). Check
that the doors open
and close correctly
and the bottom seal is
in contact with the
shower tray base.
The door must nearly
be touching when
closed so as not to
leak. Using the drill
provided drill through
the holes in the
corner section and
lock into position with
the 1/2” self tapping
screws and
shakeproof washers
provided.
Tri-fold/bi-fold
doors
Slide the door into the
corner section and
tighten screws,
shake-proof washers
and slot covers
loosely. Place the
door receiver into the
opposing corner
section and tighten
with two washers,
slot covers and 1/2”
screws. Before
locking the door tight
ensure that the door
is straight and that the
sliding handle locks
correctly. Also,
check that the
magnetic strip mates
with the one in the
receiver.
Fig 4.9
