User Guide
11
9.
Fig 4.8. Prior to
fitting the roof panel,
ensure that the
cubicle is square and
upright.
Locate the roof panel
(9) into the top of the
corner posts one at a
time.
Slackening the roof
screws will be helpful
if the roof is difficult
to align. Secure with
grub screws.
If an (optional) seat is
to be fitted
The sliders must be
positioned first. Feed
them into the channel
from the top and push
them all the way
down to the bottom of
the side panel.
The seat can then be
fitted using the
screws provided.
Please contact your
Chiltern Invadex
regional office if a
seat is required, but
has not been ordered.
Fig 4.8
Chiltern Invadex Side Entry MK2
10
8.
Fig 4.7 Position the
grab rails onto the
factory fitted
securing blocks.
Secure via 2 M4x6mm
screws provided
(see inset).
Key
A
- Back grab rail
B
- Side grab rail
C
- Shower riser rail
7.
Fig 4.6 Locate the
side panel (with the
shower unit on it) (8)
into the corner post
channel (1) and
locate corner post
(7). Fix as previous.
Fig 4.6
Fig 4.7
C
B
A
