background image

User Guide

1

Contents

Installation........................................................ 2

Cleaning &  Maintenance............................... 14

Troubleshooting

............................................. 15

Operation Guide ............................................ 16

Accessories.................................................... 17

Spare parts..................................................... 18

Warranty ......................................................... 20

Side Entry Mk2  Shower Cubicle

These products have been designed to the
highest standards with safety, strength and
quality in mind.

Follow the recommendations in this guide to
ensure maximum benefit from your Chiltern
Invadex  Shower Cubicle.

Chiltern Invadex Side Entry MK2

20

Warranty

Your Chiltern Invadex Shower Cubicle carries a 12 month warranty from
the date of purchase (for guarantee on shower unit see manufacturers
details), subject to the following:-

1. Should you experience any problems with our workmanship or

materials within the first 12 months period, please contact your point
of purchase.

2. Repairs made during the warranty period will be carried out free of

charge, provided the product has been used strictly in accordance
with the guidelines set out in this user guide.

3. Our warranty does not cover replacements, adjustments or repairs

which may be required as result of normal wear and tear, wilful or
accidental damage, misuse, neglect or any other cause which is
beyond the control of Chiltern Invadex.

4. Modifications and repairs made to this product by unauthorised

persons will render the warranty void.

5. Only parts manufactured or approved by Chiltern Invadex shall be

used to repair this product. Use of unauthorised parts will invalidate
all warranties and remove all liability from Chiltern Invadex for the
safety of this product.

6. Chiltern Invadex shall in no event be liable for any damages, costs or

expenses arising from any claim made under this warranty (save for
any legal liability of Chiltern Invadex for death or personal injury
resulting from the company’s negligence in respect of its products).

7. Faults due to inadequate cleaning, limescale or other water impurities

including debris not flushed from the supply pipe work prior to
connection are excluded from this warranty.

8. This warranty does not affect your statutory consumer rights

Summary of Contents for Side Entry Mk2
























Reviews: