User Guide
13
Pumped waste
assembly
11. Fig 4.10 Push
outlet (waste) hose
through the hole in the
corner post (1) and
secure it to the stack
pipe moulded in the
base. Do not stretch
the waste pipe, allow
for possible
adjustment. Connect
the pump unit to the
electrical connector,
ensuring a firm fit.
Push the motor
housing into the base
socket until the face of
the pump and socket
meet. Prior to fitting
the pump cover (10)
ensure that the
electrical cable and
waste pipe are clear
of obstructions.
Fig 4.10
To waste pipe
Chiltern Invadex Side Entry MK2
8
3.
Fig 4.2 Locate the
large rear back panel
(3) into the channel in
the corner post.
4.
Fig 4.3 Slide in the
second corner
section. This section
seat fixing plate (with
4 holdes) and is blank
i.e without any door
adjusting slots.
Tighten the section
with the allen key
supplied.
Fig 4.2
Fig 4.3
