SNA8110T Gepon OLT User Manual
陈泽科技有限公司
www.stephen-tele.com
This panel allows the operator to create rules to filter (drop received frames), based on many different criteria (Rules).
9.2.1 Selecting the Port for Filtering
The Port to Filter is selected using the Port drop down box.
9.2.2 Using the Rule Grid
The Filtering Panel Rule Grid is almost identical to the Classification Panel Rule Grid, except that the Q
column is absent, as it is not required.
9.2.3 Constructing an OLT Filtering Rule
Step 1.
Choose the Field Select. Field Selects defined by the OLT are given a descriptive label.
Step 2.
Choose an appropriate Operator. The operator tests the portion of the frame specified by the field
select.
Step 3.
Choose an appropriate Lookup Value. This is the value that will be used by the operator in the comparison. This step is only
applicable to binary operators. If the operator selected is unary (such as Field Exists) the Value field will be disabled.
Step 4.
Add the clause to the Rule Editor using the left arrow button. Note that the right arrow button can
be used to remove a selected clause from the Rule Editor.