SNA8110T Gepon OLT User Manual
陈泽科技有限公司
www.stephen-tele.com
Alarms will be cleared when the GUI receives a clear alarm message or another network event signifying
that the alarm condition is no longer present.
The GUI Alarm Log will display a new entry, retained until the GUI is terminated. The GUI Alarm Log
will indicate the way in which a particular alarm was detected, or the reason why it was cleared in the
column labeled Disposition. The GUI has 3 different alarm “dispositions”: autonomous, audit, and internal.
10.2 Enabling alarm auditing
The GUI can be configured to perform a periodic audit of the ONU and OLT alarms. By default this feature
is disabled. To enable Alarm auditing follow the steps below.
Step 1.
Open the Settings dialog box as illustrated below:
Step 2.
Click on the Audit alarms, check box. The Period field is used to determine the rate at which a
single ONU/OLT is audited. The GUI ensures that the time between audits remain exactly the same for all entities.