SNA8110T Gepon OLT User Manual
陈泽科技有限公司
www.stephen-tele.com
managing mode based on SLA and PRI can ensure the users` mini bandwidth demand and low time-delay
requirement for the PRI operation
。
●
Great OAM characteristic
SNA8110T supports many operating and manageable telecom characteristics ,such as ONU auto-detection,
auto-registration
，
testing user connection, binding MAC address and filtration, IP address binding and filtration
、
bandwidth control
、
VLAN
（
based on two divisiory means of port and 802.1Q
）
、
flow control
、
port aggregation,
port mirror and broadcast control.
Technical Parameter
:
Standard Compliance : IEEE 802.3ah
、
IEEE 802.3
、
IEEE 802.3u
、
IEEE 802.3x
、
IEEE 802.3z
、
IEEE 802.1d
、
IEEE 802.1p
、
IEEE 802.1q
、
IEEE 802.1x
、
RFC1155
、
RFC1157
、
RFC1112
、
RFC1113 and so on.
●
back board exchange capacity
：
16G
●
adjustment capacity
：
1Kbps
●
supporting 4K VLAN based on802.1q
，
and even 8 K MAC addresses.
Physics feature
●
Physics dimension (L440 x W207 x H43, unit: mm)
●
frame
：
19inches,1U height
●
Power supply
：－
48V distributing DC
（
wave range is-40V
～
-57V
）
or 100V
～
240 V AC
●
Weight
：
4.3kg
●
Power consumption
：
15W
●
Temperature
：
Operating temperature
：
0
～
50
℃
Storage temperature
：
-30
～
60
℃
Relative humidity
：
10
～
90% (no coagulation)
Chapter 2: Installation and link
1. Attention item for setting
Please insure that there is suitable work environment and enough free space before installing machine. Please
note the installing requirement as following:
●
Power supply requirement: 100v-240v AC, the distance between power supply jack and equipment should be
within 1.8m.
●
Machine should be putted in the ventilated and dry environment, it must leave at least 10cm free space from
front to back of machine to airiness
●
Insure that around for machine has enough airiness port in order to diffuse quantity of heat, at the same time;
don’t put anything heavy on the switch.
Chapter 3
：
：
：
：
Software introduction
1 Audience
This document is intended for engineers evaluating the TK37XX family of integrated EPON solutions. The
document explains how to use the TK37XX PC HOST GUI EponSystemApp.exe, for the purpose of evaluating the
functionality and usability of TK37XX Host Interface Protocol. This manual assumes that the reader has a
technical background and a base level of understanding regarding the basic operation of PON equipment, but
does not assume any prior experience using the TK37XX or any other product. The PC Host GUI is a
demonstration package, intended for evaluation purposes only.
2 Organization of the GUI
The screen real estate used by the GUI is divided — MDI style — into three sash windows. The upper left panel
