SVP309P Office POE SIP Phone User Manual
STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: Support@stephen-tele.com / Url: www.stephen-tele.com
26
SERVICE PORT
Field name
explanation
HTTP Port
set web browse port, the default is 80 port
，
if you want to enhance system
safety
，
you'd better change it into non-80 standard port
；
Example: The IP address is 192.168.1.70. and the port value is 8090, the
accessing address is http://192.168.1.70:8090
Telnet Port
Set Telnet Port, the default is 23. You can change the value into others.
Example:
The IP address is 192.168.1.70. the telnet port value is 8023, the accessing
address is telnet 192.168.1.70 8023
RTP Initial Port
Set the RTP Initial Port. It is dynamic allocation.
RTP Port Quantity
Set the maximum quantity of RTP Port, the default is 200.
Notice:
1
）
You need save the configuration and reboot the phone after set this page.
2
）
If you modify the port of Telnet and HTTP, you would better set the value more than 1024 because the port
value less than 1024 is system port reserved.
3
）
if you set 0 for the HTTP port, it will disable HTTP service.
4.3.2.5. DHCP SERVER
