SVP309P Office POE SIP Phone User Manual
STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: Support@stephen-tele.com / Url: www.stephen-tele.com
43
Auto Provision
Field name
explanation
Current Config Version
Show the current config file’s version.
Server Address
Set FTP/TFTP/HTTP server IP address for auto update. The address can be IP
address or Domain name with subdirectory.
Username
Set FTP server Username. System will use anonymous if username keep blank.
Password
Set FTP server Password.
Config File Name
Set configuration file’s name which need to update. System will use MAC as
config file name if config file name keep blank. For example, 000102030405.
。
Config Encrypt Key
Input the Encrypt Key, if the configuration file is encrypted.
Protocol Type
Select the Protocol type FTP
、
TFTP or HTTP.
Update Interval Time
Set update interval time, unit is hour.
Update Mode
Different update modes:
1. Disable: means no update
2. Update after reboot: means update after reboot.
3. Update at time interval: means periodic update.
4.3.5.2. Syslog Config
Syslog is a protocol which is used to record the log messages with client/server mechanism. Syslog server receives the
messages from clients, and classifies them based on priority and type. Then these messages will be written into log by
some rules which administrator can configure. This is a better way for log management.
8 levels in debug information:
Level 0---emergency: This is highest default debug info level. You system can not work.
Level 1---alert: Your system has deadly problem.
Level 2---critical: Your system has serious problem.
Level 3---error: The error will affect your system working.
Level 4---warning: There are some potential dangers. But your system can work.
Level 5---notice: Your system works well in special condition, but you need to check its working environment and
parameter.
Level 6---info: the daily debugging info.
Level 7---debug: the lowest debug info. Professional debugging info from R&D person.
