Assembly Instructions
Step 1
:attach the console masts to the base frame.
A;)put the console wire through the console mast .
B:)then attach left/right console mast into main frame with two M8X15mm bolt using
washer wrench.
Step 2: attach the console crossbar to the console mast
A) assemble the console crossbar to the console mast with four M8x15mm bolts and
washer each side.
Step 3: attach the console to the console mast
A) connect the wire from the console to the wire in the right console mast.
B) assemble the console to the console mast with two M4x15mm bolts and
wrench.(do not tighten the bolts)
ATTENTION: be careful when you connect the two console—controller wires. There
are pins inside connector, the pins must be straight, otherwise it will cause problems.
(Insure pins are straight)
Step 4: tighten step 1, step 2 ,step 3 bolts.
First open switch and working machine, then tighten bolts.
9
Console mast
Console
Console mast
Console crossbar
