5
STEP 3
Slide the front post (9) into
the front post housing, and
then fix with four sets of M8
x 16mm bolts (13) and
washers (6). Making sure
you do no trap any of the
wires, and slide the plastic
protection (10) into the front
post housing.
STEP 5
Insert the seat post (19) into
the frame (3) and line up the
holes. Secure the seat in
position with the Adjusting
knob (22). The correct height
for the seat can be adjusted
after the bike is fully
assembled.
STEP 4
Tap the Seat Post (19) into
the end of the fabrication
Summary of Contents for CF-1580
Page 1: ...CF 1580 MAGNETIC EXERCISE BIKE...
Page 3: ...2...
