Trouble Shooting
TROUBLE SHOOTING GUIDE:
SYMPTOM
CAUSE
SOLUTION
Show E0
Not equip Safety key
Please equip the Safety key
Show E1
Speed feedback equipment err
Please check Speed feedback equipment
and 10-pin cable or contact special service
TROUBLESHOOTING YOUR TREADMILL:
This treadmill is designed to be reliable and easy to use. However, if you experience a
problem, please reference the trouble shooting guide listed below:
PROBLEM: The console does not light up.
SOLUTION: Verify that the power cord is plugged in properly to the outlet, and the
treadmill switch is turned on.
PROBLEM: The treadmill circuit breaker trips during a workout.
SOLUTION: Verify that the treadmill is plugged into a dedicated 20amp circuit.
*Note: No extension cord.
PROBLEM: The treadmill shuts off when elevating.
SOLUTION: Verify that there is enough slack in the power cord to reach to the wall outlet
during elevation.
PROBLEM: The running belt does not stay centre during a workout.
SOLUTION: Verify that the treadmill is on a level surface. Verify that the belt is properly
tightened. (Refer to belt adjustment)
PROBLEM: The treadmill makes a clicking noise towards the front of the machine while
walking or running on it.
SOLUTION: For optimum use, the treadmill needs to be level.
20
Summary of Contents for CE-7305
Page 1: ...Treadmill Manual...