- 106 -
3. Parameter settings
(1) Pressing the
key displays the
menu window (list of setting items).
(2) Select
“Dig Inp”.
(3) Move the cursor to the target remote
contact No. wi
th the ▲/▼ keys and press
the
key. The cursor does not move
to parameters other than No.
(4) Press the
key to make it available
for setting and then select a value.
(5) After completing the setting, move the
cursor to Set .
(6) Press the
key to register the
setting (when chart recording is ON, a
setting change mark is printed). To cancel
the setting, press the
key.
[Dig Inp setting parameter]
Parameter
Function
Default
Set value
Mode
Allocate
function to
specified
remote contact
terminal No.
None
None (not used), ChartSpeed (chart speed), Message 1,2 (message 1 & 2
printing), Message 1to5 (message 1 to 5 printing),
DataPrint, ListPrint 1 (list 1 printing), ListPrint 2 (list 2 printing), ListPrint 3
(list 3 printing), INT-Reset(All) (integration reset), Clock Adj (time
correction), Message 1 (message 1 printing) to Message 20 (message 20
printing)
