- 112 -
2. Address setting
Set the destination address. E-mail can be sent to up to three different addresses.
(1) Pressing the
key displays the
menu window (list of setting items).
(2) Select
“E-mail”.
(3) Move the cursor to Setting beside
“Address” and press the
key.
(4) Move the cursor to the target address No.
wi
th the ▲/▼ keys and press the
key. The cursor does not move to
parameters other than No.
(5) Press the
key to make it available
for setting and then enter a destination
address.
(6) After completing the setting of this item,
move the cursor to Set .
(7) Press the
key to register the
setting (when chart recording is ON, a
setting change mark is printed). To cancel
the setting, press the
key.
[E-mail Address setting parameter]
Parameter
Function
Default
Set value
Address
Set destination address for E-mail using 32
characters maximum
Not set
