- 61 -
8-6. Broken Line Approximation Table Settings
“Seg.Tbl”
Set the table used when “BrokenLine” is selected as calculation type.
Up to six tables can be set, and up to 30 points can be set to each table. For channels
selecting “BrokenLine” as
calculation type, a table can be selected individually from six options.
(1) Pressing the
key displays the
menu window (list of setting items).
(2) Select
“Seg.Tbl”.
(3) Pressing the
key advances the
table number. Press the
key to
select the target table.
Also, pressing the
key on this
window displays the copy window for table
settings.
(4) Move the cursor to the parameter to be set
(5) Press the
key to make it available
for setting and then enter a value.
(6) After completing the settings of this item,
move the cursor to Set .
(7) Press the
key to register the
settings (when chart recording is ON, a
setting change mark is printed). To cancel
the settings, press the
key.
[List of Seg.Tbl setting parameters]
Parameter
Function
Default
Set value
X.Dot
Set decimal point position of X axis factor
0
0 to 3
Y.Dot
Set decimal point position of Y axis factor
0
0 to 3
X-01 to X-30
Set X1 to X30 of broken line approximation
table
-
- (Not set), -30000 to 99999
When
“-“ is selected, subsequent X factor
settings will be disabled.
Y-01 to Y-30
Set Y1 to Y30 of broken line approximation
table
-
- (Not set), -30000 to 99999
When
“-“ is selected, subsequent Y factor
settings will be disabled.
