- 90 -
8-25. Measured Value Display Order Settings
“D.Order”
The order of CH update can be changed for measured value display. When the 6-point display mode is selected,
measured value will be displayed in the specified CH No. order.
(1) Pressing the
key displays the
menu window (list of setting items).
(2) Select
“D.Order”.
(3) Set CH No. to create a desired order of
update (display) from 01 to 06.
(4) Press the
key to make it available
for setting and then enter CH No.
(5) After completing the setting of this item,
move the cursor to Set .
(6) Press the
key to register the
setting (when chart recording is ON, a
setting change mark is printed). To cancel
the setting, press the
key.
[D.Order setting parameter]
Parameter
Function
Default
Set value
CH No.
Set CH No. to be updated
(displayed)
1 to 6
- (Skipped with 1-CH display, blank display with multiple
channel display), 1 to 6
