background image

Installation  in  any  damp,  condensed-phase  environment  with 
inflammable and explosive gas is forbidden. It is strictly prohibited 
to operate the product with wet hands.

You  are  prohibited  from  touching  the  conductive  part  when  the 
product is operating.

It  is  strictly  prohibited  to  test  the  performance  of  the  product  by 
the direct contact of the hot wire against the grounding device or 
the direct short circuit of the hot wire and the neutral wire. 

When  the  product  is  being  installed  or  maintained,  the  power 
must be switched off.

The protection features of the product are set by the manufacturer. 
It is not allowed to open or adjust the circuit breaker at will.

The  product  must  be  wired  and  installed  by  qualified  personnel 
and be checked regularly.

It is prohibited to let children play with the product or the package.

Prevent foreign objects from falling into the product.

Do  not  install  the  product  at  places  where  gas  media  can  cause 
metal corrosion and insulation damage.

Tighten  the  wiring  screws  when  installing  the  product  to  prevent 
wires from loose or being pulled out. Select wires strictly according 
to  instructions  and  connect  them  to  proper  power  supply  and 
load.

This  product  does  not  provide  protection  for  electric  shock  and 
electricity unbalance.

1

2

3

4

5

6

7

8

Safety Warning

9

10

11

Summary of Contents for NB1-63 Series











Reviews: