When the product is installed and used, the wiring screws should
be tightened, the wires should not be easy to loosen or pull out
and should be selected in strict accordance with the
requirements, and the power supply and load should comply
with the requirements.
The product cannot protect against the danger of electric shock
caused by touching both wires of the protected circuit at the
same time.
The product must be wired correctly in strict accordance with
the wiring diagram.
The product is not suitable for the direct start of high-
inductive and high-capacity loads, such as fans, electric
motors, electric heating equipment, capacitor cabinets, etc.
The product does not have overload and short-circuit
protection functions, and an additional circuit breaker is
required for protection.
11
12
10
13
14
