CAS 2700-53 Pulse API to BACnet IP Gateway Manual
Page
13
of
30
2015 Chipkin Automation Systems
, 3381 Cambie St- Box 211, Vancouver, BC, Canada, V5Z 4R3
Tel:
(866) 383-1657,
Fax:
(416) 915-4024
Website:
You will see the following form:
Image 4.2 –Pulse API Configuration Page
There are two different sections of the form to fill out.
Note:
After finishing the configuration, you must save and reboot the Gateway for the configured
settings to take place.
4.1 BACnet IP Server Configuration
The parameters for the BACnet IP Server Configuration are as follows: (Default values are
Bolded)
Port:
The port for the UDP connection for BACnet IP. Default Value:
47808
Device ID:
The BACnet Device ID for the Gateway. Default Value:
389001
Device Name:
The name of this BACnet Device. Default Value:
Device (389001)
Click on the ‘Save BACnet Device’. If successful, you will see the following message banner.
Image 4.3 –BACnet IP Server Configuration Successful
