CAS 2700-53 Pulse API to BACnet IP Gateway Manual
Page
16
of
30
2015 Chipkin Automation Systems
, 3381 Cambie St- Box 211, Vancouver, BC, Canada, V5Z 4R3
Tel:
(866) 383-1657,
Fax:
(416) 915-4024
Website:
5. Reading the Data
The data read by this Gateway is made available through the BACnet IP Protocol. The Gateway acts as a
BACnet IP Device. This section describes how the data is formatted, what data is stored as BACnet
Points, and what functions are supported.
5.1 BACnet IP Data
The Gateway acts as a BACnet IP Server. Please refer to section 4 – Configuring the Gateway for more
information on how to setup the BACnet IP Server parameters.
For more information about BACnet in general, please read this guide:
http://www.chipkin.com/files/pdf/Bacnet%20For%20Field%20Technicians.pdf
5.1.1 Supported BACnet Services
The Gateway supports the following BACnet services:
-
Who-Is
-
Who-Has
-
Read Property
-
Read Property Multiple
-
Write Property
-
Write Property Multiple
-
Subscribe COV
-
Time Synchronization
Note:
CAS is always updating the BACnet IP Driver. For a recent list of supported services, please visit
www.chipkin.com or contact us. If there are services that you require, please contact us to discuss how
we can add them to the driver.
5.1.2 BACnet IP Data
The following is a list of data points that can be configured on the Gateway.
Pulse Resource
Data Resource
Data Quantity
BACnet Object Read/Write
State
Electricity
ApparentPower
Analog-Input
Read Only
State
Electricity
Energy
Analog-Input
Read Only
