4
ASSEMBLY INSTRUCTIONS
CAUTION!
FOLLOW EXACTLY THE INSTRUCTIONS GIVEN FOR ASSEMBLY AND USAGE OF
THE TOY AND CHECK THE PICTURES.
CAUTION!
AFTER EACH OPERATION, MAKE SURE THAT YOU HAVE FOLLOWED THE
INSTRUCTIONS CORRECTLY AND THE FIXING IS STABLE!
CAUTION!
TOY MUST BE USED WITH HIGH ATTENTION BECAUSE BALANCE SKILLS ARE
REQUIRED. ONLY THIS WAY YOU WILL AVOID FALLING OR IMPACTS CAUSING INJURIES OF
THE CHILD.
For assembly of the toy you do not need any tools.
In set are included spare screws and allen wrench.
KID’S TOY SCOOTER
1, 2 – SETTING THE SEAT IN VERTICAL POSITION
3 – ASSEMBLY OF STEERING BAR
4 – HEIGHT ADJUSTMENT OF STEERING BAR – 3 positions
Press pin A and set the steering bar upwards or downwards until you reach required position.
Note:
Make sure the pink jumps out of the opening and steering bar is fixed!
5 – BUTTON FOR DIRECTION OF FRONT WHEEL
Grab the key with hands at both sides and rotate it so that arrow shows “down” (marked with 2 dots).
Front wheel will be set in straight motion direction only.
6 – REAR WHEELS POSITION AND FRAMES OF REAR WHEELS ADJUSTMENT
Press the button for rear wheel adjustment and fix it in
position 1
.
Press the button for rear wheel frame adjustment and fix it in
position 1
.
7 – ASSEMBLED TOY SCOOTER – MODEL 1
8 – USING THE BRAKE AS MODEL 1
To use the brake during ride, child has to step on it with one of the feet and press it until scooter stops.
9 – ADJUSTMENT OF REAR WHEELS FRAMES
10,11 – ADJUSTMENT OF REAR WHEELS IN POSITION 2
12, 13 – ADJUSTMENT OF REAR WHEELS FRAMES IN POSITION 2
14 – ASSEMBLED TOY SCOOTER – MODEL 2
15 – USING BRAKE AS MODEL 2
To use the brake during ride, child has to step on it with one of the feet and press it until scooter stops.
RIDE ON TOY
16 – REMOVAL OF STEERING BAR
17, 18 – SETTING THE SEAT IN HORIZONTAL POSITION
19 – ASSEMBLY OF STEERING BAR
Note:
During assembly, button for removal must jump out.
To remove the steering bar, press the button and pull the steering bar upwards.
20 – BUTTON FOR DIRECTION OF FRONT WHEEL
Grab the key with hands at both sides and rotate it so that arrow shows “up” (marked with 3 dots).
Scooter will turn left/right.
21 – ASSEMBLED RIDE ON TOY
KID’S TOY BALANCE BIKE
22 – ADJUSTING OF REAR WHEELS FRAMES OUTWARDS
23, 24 – SETTING THE REAR WHEELS POSITION 1
25 - ADJUSTING OF REAR WHEELS FRAMES INWARDS
26 - ASSEMBLED BALANCE BIKE TOY
