BCD-430WP Service Manual
5
III.
Operating instructions
1.
Keys
Temp.Zone
This is the key to select the temperature
zone, and the temperature zone changes
each time the key is pressed. When the
fridge zone is selected (with icons of both
the left and the right fridge doors flickering
at the same time), temperature digits starts
flickering. After temperature setting, press
the OK key to validate it. When the freezer
zone is selected (with icons of both the left
and the right freezer doors flickering at the
same time), set the temperature by
reference to the fridge temperature setup.
1)
The temperature zone selection changes
through the following cycle:
Fridge → Freezer →Fridge;
Note:
When the function program is enabled, temperature setting becomes invalid.
2)
Every time when settings are finished (with no flickering any more), if the Temp.
Zonekey is pressed again, the Fridge icon starts flickering first.
3)
Fridge OFF: When the fridge temperature is set, the temperature setting progresses
through the following cycle.
2
℃
→3
℃
→4
℃
→5
℃
→6
℃
→7
℃
→8
℃
→OF→2
℃
(‘OF’ represents the OFF state, and when the OF setting takes effect, the fridge will be
shut off, with no refrigeration request.)
Temp. (temperature setting)
1
）
Under the temperature setting state, the temperature rises by 1
℃
( in case of integer
bit change )with each key response.
2
）
Adjustable temperature range for each compartment:
Fridge compartment : 2
℃～
8
℃
;
Freezer compartment: -16
℃～
-24
℃
;
OK/Lock
1
）
Under the state of function selection or temperature setting, the selected function or
the set temperature value takes effect when this key is pressed, with the corresponding
