EN
11
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of time during this process, it must be allowed to remain upright
for 6 hours before plugging it in to avoid damage to the internal components.
1. Remove the hinge cover and upper hinge from the top
right side of the cabinet. Remove the screw hole covers
from the top left side of the cabinet.
2. Remove the freezer door from the cabinet. Move the
hinge plug from the top left to the top right side of the door.
3. Remove the center hinge from the right side cabinet.
Remove the screw hole covers from the left side of the
cabinet.
4. Remove the refrigerator door from the cabinet. Move
the hinge plug from the top left to the top right side of the
door.
5. Remove the door stop from the lower right side of the
refrigerator door. Install the door stop on the lower left side
of the refrigerator door.
6. Remove the lower hinge from the bottom right side of
the cabinet. Remove both adjustable feet. Remove the
lower hinge pin from the hinge,
fl
ip the hinge over and
reinstall the hinge pin on the other side. Install the lower
hinge on the bottom left side of the cabinet. Install both
adjustable feet.
7. Install the refrigerator door. Install the center hinge on
the left side of the cabinet. Install the screw hole covers on
the right side of the cabinet.
8. Install the freezer door. Install the upper hinge and the
hinge cover on the top left side of the cabinet. Install the
screw hole covers on the top right side of the cabinet.
Note: Ensure the rubber gaskets are making a good seal with the cabinet all the way around the doors before tightening
the hinge screws.
