4
OPERATING INSTRUCTIONS
STARTING
Plug the power cord into the power point, run light (Green light) will be on when
the compressor starts running. When it reaches setting temperature, the
compressor will stop running and green light will be off.
Do not load the appliance immediately after it is switched on. Wait for about 2-4
hours until the freezer reaches correct temperature.
TEMPERATURE CONTROL KNOB
The inside temperature of freezer is regulated by thermostat adjustment knob.
“1,2,3,4,5,6,7” marks on the knob, the smaller number represents the higher
temperature and the bigger number means lower temperature.
“
1
（
Refrigerator
）
”
: Temperature range
（
5
℃）
“
2-4
（
Freezer
）”
: Temperature range
（
-12~-18
℃）
“
4-7
（
Freezer
）”
: Temperature range
（
-18~-24
℃）
"7
（
Fast freezer
）
": Temperature range
（
below-24
℃）
4
is recommended for normal use environment in freezer mode.
Fast freezer
(below -24
℃
）
: While turn the knob to 7, it will be set to Fast freezing
mode which is recommended for the first time use or food need to be frozen quickly.
After the freezer runs in fast freezing mode for 12 hours, change knob setting back
to 4.
Don’t leave it on fast freezer model for more then 24 hours a time
.
Please note the appliance is using sensitive thermostat, it will keep more
stable temperature inside the unit. In order to do so, the compressor might
cut in and out more often which is normal operation of the unit.
