background image

 

weeks. 

 

Long vacations:

 If the appliance will not be used for several months, remove all food 

and unplug the power cord.  Clean and dry the interior thoroughly.  To prevent odour 
and mold growth, leave the door open slightly. 

 
 

Repositioning and Relocating the Freezer 

 

Unplug the power cord from the wall outlet. 

 

Remove all the food and drinks. 

 

Securely tape down all loose items inside your Freezer. 

 

Tape the doors to be closed securely. 

 

It is recommended that the Freezer stays in the upright position during 
transportation. But if it is laid down for transport purpose, please lift it up 
immediately after the job is done. Please wait for at least 24 hours before putting the 
power. 

 

 

 

 

 

 

TROUBLESHOOTING GUIDE 

 

 

 

Problem 

 

 

Solution 

 

The freezer has no power 

 

 

 

Power cord isn’t plugged in properly. 

 

The circuit breaker tripped or a blown fuse. 

 

Try a different power point. 

 

Compressor runs all the 

time 

 

 

The room temperature is hotter than normal. 

 

A large amount of food has been added to the Freezer. 

 

The door is opened too often. 

 

The door is not closed completely. 

 

The temperature control is not set correctly. 

 

The door gasket does not seal properly. 

 

The Freezer does not have the correct clearances. 

 

The Freezer has recently been disconnected for a period 

of time. 6+ hours are required for the Freezer to cool 

down completely pending on operating conditions. 

 

Temperature inside the 

Freezer is too cold. 

 

 

Temperature control is set too cold. Turn the control to a 

warmer setting and allow several hours for the 

temperature to stabilize.  

 

Summary of Contents for CCF098DB












Reviews: