10
6. Take out the lower left hinge from the accessory bag,
and install it on the refrigerator.
7. Remove the door stopper and door closer, take out the
door closer from the accessory bag, and install it on the
left side of the door.
8. Install the door on the refrigerator.
9. Take out the bolts of the upper left hinge from the
accessory bag, fix them on the cabinet, and connect the
wiring harness.
10. Take out the top left hinge cover, connect it with the
wiring harness, and install them on the cabinet.
11. Install the magnet on the left side of the door.
12. Remove the help handle cover, screw off the handle
screws, and dismantle the handle, as illustrated by the
figure:
13. Install the help handle on the other side of the door
after rotating it by 180° vertically, as shown in the figure:
14. In this way, reversing the door swing can be finished,
as shown in the figure:
