order to avoid a hazard.
Locks
If your Refrigerator is fitted with a lock, keep the key out of reach and not in the vicinity of the applianceto prevent children
being entrapped. When disposing of an old Refrigerator, break off any old locks or latches as a safeguard.
Freon-free
The freon-free refrigerant (R600a) and the foaming insulation material (cyclopentane) that is environmentally friendly are
used for the refrigerator, causing no damage to the ozone layer and having a very small impact on the global
warming.R600a is flammable, and sealed in a refrigeration system, without leakage during normal use. But, in case of
refrigerant leakage due to the refrigerant circuit being damaged, be sure to keep the appliance away from open flames
and open the windows for ventilation as quickly as possible.
II. Product features
★
Computer control
Adopting the electronic temperature control mode, the fridge-freezer is designed with a LED display screen, by which the
temperature of each compartment and the working parameters can be managed and set.
★
Inverter technology
Integrated with precise frequency conversion, noise reduction, energy saving, precise temperature control and other
technologies, the fridge-freezer boasts of superior performances. Furthermore, working efficiency of the inverter
compressor can be automatically adjusted according to the ambient temperature and the set temperature, so as to keep
the fridge-freezer operating in its optimal state.
★
Green technology
The freon-free refrigerant and foaming insulation material are used for the fridge-freezer, causing no damage to the ozone
layer and having a very small impact on the global warming, so it is the environmentally friendly product.
★
More user-friendly designs
Such functions as wide working voltage range, automatic temperature control, power-off memory, power-on delay,
automatic alarm, fast freezing, and fridge power-off, etc. are available.
Explosive views and parts list
Due to technological innovation, the descriptions of the product in this manual may not be completely consistent with your
refrigerator. Details are in accordance with the material item.
III. Preparations for use
Installationlocation
1.
Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has less hot air. Do not locate the
refrigerator near a heat source such as cooker, boiler, and avoid it from direct sunlight, thus guaranteeing the refrigeration
effect while saving energy consumption. Do not locate the refrigerator in the damp place, so as to prevent the refrigerator
from rusting and leaking electricity.The result of the total space of the room in which the refrigerator is installed being
divided by the refrigerant charge amount of the refrigerator shall not be less than 8 g/ M
3
.
Note: The amount of refrigerant charged for the refrigerator can be found on the nameplate.
2. Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least 300mm of free space should be spared
at the top side, more than 100mm on both sides, and above 50mm at the back side of the refrigerator.
No Description
1 Light
2 Lighting switch
3 Cooling room shelves
4 Vegetable and fruit crisper cover
5 Vegetable and fruit crisper
6 Freezing drawers
7 Door balcony
