10
7. Remove the washer and nut that secure the pin shaft to
the right hole on the lower hinge, then remove the shaft
and pin screw
8. Insert the pin screw into the right hole and insert the pin
shaft into the left hole on the lower hinge,, then secure the
shaft with the washer and nut.
9. Install the lower hinge on the left side of the cabinet.
10. Remove the screw that secures the door stops from
the bottom right of the refrigerator compartment door, then
remove the door stops and install to the bottom left side.
11. Install the refrigerator compartment door.
12. Move the door bushing from the top right side of the
refrigerator door to the top left side of the door. And move
the left hole cover to the right side.
13. Remove screws and the center hinge screw hole plug
on the left side of the cabinet, then install in the screw
holes on the right side of the cabinet.
14. Install the center hinge to the left side with the two
screws you removed previously.
15. Remove the screw that secures the door stops from
the bottom right of the freezer compartment door, then
remove the door stops and install to the bottom left side.
16. Install the freezer compartment door.
17. Move the door bushing from the top right side of the
freezer door to the top left side of the door. And move the
left hole cover to the right side.
18. Remove the screw that secures the hinge screw hole
cover from the top left side of the cabinet, remove the
cover and secures the cover on the top right side of the
cabinet.
19. Secure the upper hinge to the top left side of the
cabinet with the three screws you removed previously.
Before you tighten the upper hinge screws, make sure
that the top of the door is level with the cabinet and that
the rubber gasket makes a good seal.
20. Install the hinge cover over the hinge on the top left
side of the cabinet.
