4
Door reversal instruction
Door reversal job requests some spare parts which are in the accessory bag, top
hinge, top hinge cover, bottom hinge and plastic door closer.
For safety purpose, two people is recommended for the job.
The following tool is required: ladder, flat screwdriver, phillips screwdriver, adjustable
spanner, socket wrench and 8mm socket.
(This instruction is for right hinge models. It can be done on opposite way for left hinge models.)
a)
Make sure the power cable is unplugged from power point.
b)
Remove the screws from the upper hinge cover and
remover
the cover carefully
.
D
isconnect two
wire
connection
s
and put the communication
w
ir
es (the wires come from cabinet)
into the hole on the top of the unit.
c)
Remove
the three bolts on the upper hinge,
then
remove the upper hinge
and
hinge bush.
(! Important !) Please remove a black color magnet next to the hinge and
insert it to another side.
d)
Remove the wire cover under the hinge and p
ut the door communication wire
(the wires
come from the door)
into the hole, then
put the wire cover back on
.
e)
Remove the three
screws and cover
from the left-side top of the refrigerator, take out the wire
harness and install the
hinge bush
.
Remove the wire cover on the top left door and
Put
wire into
the hole
.
Magnet
Wire Cover
Magnet
