5
take out two wire harness from there.
f)
Lift
up
the refrigerator door
, remove it from bottom hinge and keep it on a stable place
.
g)
Remove the front leveling feet, use
adjustable spanner or socket wrench
to remove the 4
screws
,
then remove the hinge.
h)
Get
the lower left hinge
from
the accessory bag
and install it on the
bottom left hand side
.
i)
Remove the door stopper
(metal)
and
door
closer
(black plastic)
from the door
right bottom
position. Put the door stopper(metal)
on the door left bottom and get a new
door
closer
(black plastic)
from the accessory bag
,
install
them with the screw from right side
.
j)
Put
the door on the
left hinge and make sure the door is level with the cabinet and
rubber gasket has a good seal
.
Hold the door on position before install the upper
hinge.
k)
Get
the upper left hinge from the accessory bag, fix it
with
bolts
and
install
the
ground
wire(with a ring end) under one bolt
.
Connect red/yellow/blue cable socket from the
door
stopper
door
closer