4
OPERATING THE REFRIGERATOR COMPARTMENT
Temperature Control
The refrigerator has one control for regulating the
temperature. The temperature control is located on
the top
left hand corner of the refrigerator compartment.
The first time the unit has been switched on, adjust the
temperature control knob to “MAX” and run for at least 2
hours before putting foods inside. This will ensure the
cabinet is thoroughly chilled before your food is stored.
The range of the REFRIGERATOR temperature control is
from position
"MIN" the warmest to "MAX" the coldest.
Adjust the temperature control to the setting that best suits
your needs.
NOTE:
-
Adjusting the temperature control in the refrigerator compartment will impact the
temperature in both the refrigerator and the freezer compartments.
- If the unit is unplugged or loses power, please wait approximately 3 to 5 minutes before
restarting the unit. If there is any attempt to restart before this time delay, the refrigerator
will not commence operation.
- Large quantities of food stored in the appliance or directly in front of the air vent will hinder
the cooling efficiency of the appliance as this can affect the airflow.
- If you choose to change the thermostat settings in the fridge compartment, adjust the
thermostat control by one increment at a time.
- Allow 24 hours for temperature to stabilize between adjustments. Do not keep opening and
closing the door once increasing the temperature.
Please note different sections of refrigerator compartment may be warmer or
cooler than others – typically the back wall and bottom lowest shelf will be the
coolest, the top door shelf will be the warmest. To avoid frost bite, please don’t
put raw vegetables too close to the coolest area.
