This mains socket must be easily accessible so that the mains plug can be removed
immediately in the event of an emergency.
Fitting the batteries into the remote control
1. Turn the remote control over with the back facing upwards, put thumb on the
top of the battery cover where it has a triangle sign. Push down gently and pull
down the cover out of the position.
2. Insert the batteries supplied into the remote control. Make sure that you insert
the
batteries correctly with
the polarity
as shown inside
the battery
compartment.
3. Replace the battery compartment cover and push in the opposite direction to the
arrow until it clicks into place.
Notes on Using Batteries:
The use of the wrong type of batteries may cause chemical leakage and/or explosion.
Please note the following:
Always ensure that the batteries are inserted with the + and - terminals in the
correct direction as shown in the battery compartment.
Different types of batteries have different characteristics. Do not mix different
types.
Do not mix old and new batteries. Mixing old and new batteries will shorten
battery life and/or cause chemical leakage. Replace batteries as soon as the y do
not work.
Chemicals which leak from batteries may cause skin irritation. If any chemical
matter seeps out of the batteries, wipe it up immediately with a dry cloth.
The batteries may have a shorter life expectancy due to storage conditions.
Remove the batteries whenever you anticipate that the remote control will not be
used for an extended period.
The batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
CAUTION:
It may result in an explosion if batteries are replaced incorrectly.
Only replace batteries with the same or equivalent type.
9
Summary of Contents for L40G7H
Page 1: ......
