12
Door Reversal Instructions
If the appliance is placed on its back or side during this process,
it must be allowed to stand upright for 6 hours before plugging
it in to avoid damage to internal components.
1.
Remove the screw hole cover from the top left side of
the cabinet. Remove the upper hinge cover and the
upper hinge from the top right of the cabinet. Remove
the refrigerator door from the cabinet.
2.
Remove the centre hinge from the right side of the
cabinet. Remove the freezer door from the cabinet.
Remove the screw hole covers from the left side of the
cabinet. Remove the freezer door from the cabinet.
3.
Remove the lower hinge from the bottom right side of
the cabinet.
4.
Remove the pin shaft to the right hole on the lower
hinge, then insert the pin shaft into the left hole on the
lower hinge.
5.
Install the lower hinge onto the lower side of the
cabinet.
6.
Remove the freezer door stop from the lower right side
to the left side of the door. Remove the refrigerator
door stop from the lower right side to the left side of
the door.
7.
Move the door bushing from the top right side of the
refrigerator door and remove the hinge hole cover
from the top left side of the door. Exchange their
positions.
8.
Install the freezer door onto the cabinet. Install the
centre hinge on the left side of the cabinet. Install the
screw hole covers on the right side of the cabinet.
9.
Install the refrigerator door onto the cabinet. Install the
upper hinge on the top left side of the cabinet. Install
the screw hole cover onto the top right side of the
cabinet.
Note: These instructions reference the models that came from
the factory with a right-hand swing door. If your appliance
comes with a left-
hand swing, ensure that you flip the “left” and
“right” in these instructions.
