Kinetec Kinevia™ / Kinetec Kinevia Duo™
EN
25/44
⑬
Heart rate:
This field indicates your current heart rate if you have connected the Kinevia cardio kit displayed in beats per
minute.
⑭
Duration:
This field displays the remaining training time displayed in minutes and seconds.
⑮
Timer:
This field indicates the set duration for the current training phase (warm up, training, recovery) displayed in
minutes. The duration can be changed by pressing this key (see section 8.6.1 on page 28).
⑯
Rotation speed:
This field indicates the pedal rotation speed displayed in rotations per minute. In passive mode, pressing this
key modifies the target speed (see section 8.6.2 on page 28).
⑰
Resistance:
This field indicates the motor braking resistance level. Pressing this key modifies the resistance during active
training (see section 8.6.3 on page 29). This key is disabled for passive training.
⑱
Symmetry:
This field respectively indicates the load level for the left and right sides of your body during active training.
The indication is displayed as a percentage for the left and right sides. The total will always be 100%.
Pressing this key displays a graphic symmetry display in the form of a bar chart.
⑲
Antispastic control (ASC):
This field indicates the sensitivity level for automatic spasm detection during passive training. Pressing this
key modifies the sensitivity level (see section 8.5 on page 27).
⑳
Level of activity:
This field indicates the share of the distance covered using your active muscular work (on the left) and the
distance covered using the motor (on the right).
All fields marked by a blue arrow can be updated during training:
-
Training session duration
-
Rotation speed
-
Resistance
-
Spasm control level
-
Symmetry display (in active mode, displayed in graphic form)
-
Heart rate (in cardio training mode)
Examples: