background image

38/44 

EN

 

Kinetec Kinevia™ / Kinetec Kinevia Duo™ 

Cleaning 

DANGER 

DANGER OF DEATH BY ELECTROCUTION 

Before  cleaning  the  device,  it  is  essential  to  switch  off  the  device  and 
unplug the power cord. 

Make  sure  that  no  cleaning  or  disinfection  liquids  penetrate  inside  the 
device. 

If  electric  components  or  cables  are  damaged,  contact  your  Kinetec 
dealer. 

WARNING 

HEALTH RISK FROM A CONTAMINATED DEVICE 

Wear suitable protective gloves to clean and disinfect the device. 

◦ Clean the device between each patient.

◦ Before each cleaning or disinfection, switch off the device and unplug the power supply.

◦ Clean the surface of the Kinevia by wiping using a soft and damp cloth.

◦ Disinfect the surfaces of the Kinevia (especially those in contact with the patient) using a surface disinfectant such as

Bactinyl

®

  from  Laboratoire  Garcin-bactinyl

®

  (Kinetec  order  references:  4665005483  for  a  spray  or  4665005491  for

wipes).

◦ Do not spray cleaning or disinfection products directly on the device or its accessories.

◦ Make sure that no cleaning or disinfection liquids penetrate inside the device.

◦ When cleaning the touch screen, only use specifically adapted cleaning products.

◦ During cleaning and disinfection, make sure no stickers or protective films are damaged.

◦ Only use cleaning and disinfection products compliant with regulations and specific standards in the country of use.

◦ Only use cleaning and disinfection products that are not aggressive and are harmless to the environment.

◦ Let the disinfectant solution dry sufficiently before returning the device to service.

WARNING 

RISK OF DAMAGE TO THE DEVICE THROUGH 

INCORRECT CLEANING OR DISINFECTION 

Do not use cleaning products that contain solvents, acids or  abrasives as 
they could attack the plastic parts of the screen. 

Follow  the  safety  instructions  provided  by  the  manufacturers  of  the 
cleaning and disinfection products. 

When in doubt, contact the cleaning or disinfection product manufacturer. 

Maintenance and safety inspections 

Kinetec recommends carrying out a visual inspection of the device before each training session. 

Kinetec recommends subjecting the device to annual maintenance in order to check the condition of the belt as well as 
different device elements. Please contact your Kinetec

®

 dealer to carry out this operation.

 

Summary of Contents for Kinetec Kinevia

















































Reviews: