Section 1: Introduction
1-2
Mirage S+/HD, Matrix S+/HD, Christie HD/DS+/DW, DLV User Manual
020-100001-05 Rev. 1 (12-2008)
•
Native SXGA+, HD or HD2 resolution
(model dependant)
with all others fully
scaleable
•
Internal scaling of stereo signals
(Mirage models)
•
10-bit video processing
•
Built-in multi-standard video decoder
•
Display of NTSC, PAL and SECAM video input
•
User replaceable Cermax
®
Xenon lamp
•
LiteLOC
™
for constant brightness
•
Intelligent Lens System (ILS
™
) to save and restore lens settings
•
Motorized lens mount for all models
•
Auto-setup feature
•
Integrated ChristieNET
™
•
Networking ability through RS232 and RS422 connectors
•
Status LED display on built-in keypad for easy projector status monitoring
•
Control with IR, wired or built-in keypad
•
Two input slots for Optional Input Modules
Refer to
Section 6
for a complete list of Specifications including Brightness and
Contrast and Optional Input Modules
There are two different types of input face plate configurations (model dependant).
See Figure 1.1 & 1.2. These configurations may include the following inputs:
•
One analog RGBHV/YPbPr input with five BNCs
•
One DVI-I input for either digital RGB/YCrCb or analog RGB/YPbPr signals
•
One analog composite-video input
•
One analog S-video input
•
Built-in multi-standard video decoder (
NTSC, NTSC 4.43, PAL, PAL-M, PAL-
N, PAL-60 AND SECAM
)
•
One Dual SD/HD-SDI module (standard on
Christie HD
models only)
•
Compatible with all currently used HDTV formats
For simplicity, this manual refers to the configuration in Figure 1.1 only.
Figure 1.1
Main
Features
Inputs
