42
calibration interface, click ABCDE, or other pointed tools, in turn, using the fingertip or other
pointed tool. To achieve the desired effect, click OK, the controller restart to save the settings; if
not achieve the desired effect can be clicked to recheck, Recalibrate according to the previous
method until the desired effect is achieved.
5.1.13
Timing pressure
The timing pressure is used to set the timing pressure value. Before the user modifies the
timing pressure parameter, it is necessary to verify the timing pressure password.
The main functions and functions are shown in the table below:
Menu
Setting
initial
value
Functions description
Loading pressure
（
MPa)
00.65
When time is between "pressure start time" and "pressure
end time," the pressure is less than this
setting to load.
Unloading pressure
（
MPa)
00.80
When the time is between the pressure start timeand thepressure
endtime,thepressureishigherthanthis
setting value to unload.
Variable Frequency
operating pressure
（
MPa)
00.70
When the time is between "pressure start time" and "pressure
end time", the supply pressure is set when
the Variable Frequency air compressor is running stably.When
thepressurefluctuatesnearthepressure, the controller adjusts the
frequency of the frequency converter. Thus, the gas supply
pressure is close to thesetvaluehere.(Thisparameteronlyworks
whenthe machine is set to be mainframe Variable Frequency or
fan Variable Frequency.).
Pressure beginning time
00:00
This time is not "00:00"; the above settings are
activated, otherwise prohibited.
Pressure end time
00:00
Thistimeisnot"00:00",theabovesettingswhenthe
pressure end function activation, otherwise disabled.
5.1.14 Start and stop at regular intervals
The timing start and stop is used to set the time of the timing switch machine for one week, and the
time of the time switch machine can be set by four sections every day.
Summary of Contents for Quan Wei
