65
QuanWei MACHINERY (Jiang Su)
parameters.
6、the factory super password::
Permissions : factory parameters in the "run time", "phase protection", "frequency selection"
and "time limit" requires the user to enter the factory parameters, again verify the super password
before modification.
6.0
Maintenance and inspection
6.1 Specification and maintenance of Lubricating Oil
6.1.1
Specification for Lubricating Oil and recommended Oil
Lubricating oil has a decisive effect on the performance of micro-oil screw machine. If used
incorrectly or wrongly, it will result in serious damage to compressor body.
Advice: please use special advised high grade lubricating oil of QuanWei screw air
compressor to ensure the service life of the main engine.
6.1.2
Reasons for affecting the time of oil exchange
1) Poor ventilation, Environmental temperature too high.
2) High humidity environment and rainy season.
3) Dusty environment.
4) Different oil mixture.
6.1.3
Oil exchange steps
1) The air compressor is operated to increase the oil temperature and facilitate the discharge.
Then press the "O" button and stop running.
2) open the relief valve, when there is pressure, the speed of oil discharge is fast, but easy to
spray out, should be opened slowly, so as not to splash the lubricating oil.
3) After the lubricating oil is cleared, close the drain valve and open the refueling port to inject
new oil. Note that all lubricating oils in the system must be cleaned, such as pipelines, coolers, oil
Summary of Contents for Quan Wei
