561105-10 en ma 2012.10
12/22
• unhook the bowl hook-on handles, as illustrated in the figure, to free the bowl
from the machine body;
• release the bowl from the machine body, using two fingers to prise it away
from the fixed steel part of the mixer auger (A) and the others to grip the
outer edge of the bowl (B). Gradually pull the bowl harder until it comes away
from its seating;
• slide the bowl upwards using both hands;
• slide the mixing auger upwards with one hand, taking care to grip it by the
rotation pin;
• place the bowl on a flat surface and using both hands, remove the gasket by
sliding it upwards in the direction shown by the arrow.
7.4. Removing the tap
Removing the tap is prohibited if the bowl contains the product
or any other liquid.
To remove the tap, proceed as follows:
• move the rod to the maximum dispensing position;
Fig. 22
Fig. 19
1°
2°
Fig. 17
Fig. 20
Fig. 21
Fig. 18
A
B
