561105-10 en ma 2012.10
16/22
• insert the mixer into its seating following the steps described in paragraph
7.3 in reverse order.
7.8.2. Assembling the tap
To reassemble the tap, carry out in reverse all of the disassembly steps illus-
trated previously (Fig. 32 to Fig. 27).
To fi t the lever (F) push the rod (D) from the inside until the guides protrude;
then insert the lever (F) and slowly release the rod (D).
Fig. 37 shows a bowl which is not correctly assembled; here the bowl does NOT
perfectly adhere to the machine edge.
• Fix the bowl to the machine body using the relevant hook-on handles, as
illustrated in the figure;
• insert the mixer auger into its seating;
Fig. 37
Fig. 39
Fig. 40
1°
2°
Fig. 38
Fig. 41
F
D
